Coulson Precision Tooling: Machine Specs

Coulson Precision Tooling: Machine Specs

View our machine specs on this page for wire EDM machines, general machining (grinders, milling machines, drills, lathes), and inspection.

Wire EDM

EDM MACHINES

CHARMILLES ROBOFIL 290 ATH WIRE FEED EDM
SPECS:

MOVEMENTS: X15.7" Y 9.8" U 15.7" V9.8" Z 7.9"
PART: 33.5" X 19.7"
LOAD CAPACITY: 750lb
TAPER: 30 DEGREES
ACCURACY: +/- .0003
AUTOTHREADER

CHARMILLES ROBOFIL 290 WIRE FEED EDM
SPECS:

MOVEMENTS: X15.7" Y 9.8" U 15.7" V9.8" Z 7.9"
PART: 33.5" X 19.7"
LOAD CAPACITY: 750lb
TAPER: 30 DEGREES
ACCURACY: +/- .0003

CHARMILLES ROBOFIL 300 WIRE FEED EDM
SPECS:

MOVEMENTS: X15.7" Y 9.8" U 15.7" V9.8" Z 15.7
PART: 33.5" X 19.7" MAXIMUM WIEGHT 750LBS
LOAD CAPACITY: 750lb
TAPER: 30 DEGREES
ACCURACY: +/- .0003

ELOX 8-2012 SINK EDM TC 50 CONTROL
SPECS:

RAM TRAVEL: 8"
TABLE SURFACE: X 20" x Y 12"
NEWALL DIGITAL READOUT

CURRENT EDM SMALL HOLE DRILL
SPECS:

MOVEMENTS: X 35" Y 12"
Z TRAVEL: 12"
MAXIMUM PART HEIGHT: 10"
MINIMUM HOLE SIZE: .012
MAXIMUM HOLE SIZE: .120
NEWALL DIGITAL READOUT

General Machining

GRINDERS

CHEVELIER FSG-1640AD SURFACE GRINDER
SPECS:

MAXIMUM GRINDING LENGTH 40"
MAXIMUM GRINDING WIDTH 16"
MAX. TABLE TO CENTER OF SPINDLE 24.375"
AUTOMATIC LONGITUDINAL, CROSS TRANSVERSE, AND
VERTICAL MOVEMENTS.
FILTERED COOLANT SYSTEM
SONY DIGITAL READOUT
ACCURACY: +/- .0001 OVER 38"

CHEVELIER FSG-618SP SURFACE GRINDER
SPECS:

MAXIMUM GRINDING LENGTH: 20"
MAXIMUM GRINDING WIDTH: 8"
MAX. TABLE TO CENTER OF SPINDLE: 20"
FILTERED COOLANT SYSTEM
MAXIMUM PART WEIGHT: 370LBS.
SONY DIGITAL READOUT
ACCURACY: +/- .0001

KO LEE SURFACE GRINDER
SPECS:

MAXIMUM GRINDING LENGTH: 20"

MAXIMUM GRINDING WIDTH: 8"

MAX. TABLE TO CENTER OF SPINDLE: 18"

MILLING MACHINES

BRIDGEPORT INTERACT 2 W/ HIEDENHAIN 145 CONTROL
SPECS:

MOVEMENTS: X 30" Y 14"
QUILL TRAVEL: 5"
POSITIONING SPEED: 400 IN./ MIN
SPINDLE: 50-4200 RPM
OPTIONAL SPINDLE SPEEDER ATACHMENT: MAX. 40,000 RPM

BRIDGEPORT INTERACT 2 W/ HEIDENHAIN 151 CONTROL
SPECS:

MOVEMENTS: X 30" Y 14"
PART: 33.5" X 19.7" MAXIMUM WIEGHT 1100LBS
TAPER: 30 DEGREES
ACCURACY: +/- .0003

BRIDGEPORT INTERACT 316 3 AXIS MACHINING CENTER
SPECS:

MOVEMENTS: X17.7"Y 12.2" Z 16.4"
POSITIONING SPEED: X-Y 787 IN./MIN.
POSITIONING SPEED: Z 470 IN./MIN.
WORKING AREA: X 33" x Y 12.6" x Z 19.37"
SPINDLE: 80- 6000 rpm
ACCURACY: +/- .0003
CONTROL: GE FANUC O-MATE M

(2) OKUMA CADETMATE 3 AXIS MACHINING CENTERS, WITH DNC
SPECS:

MOVEMENTS: X40" Y 20" Z 20"
SPINDLE FACE TO TABLE: 7.87"-27.87"
LOAD CAPCITY: 700lb
TOOL MAG. CAPACITY: 20
COOLANT CHILLER
SPINDLE SPEED: 40-8000 RPM
POSITIONING SPEED: 591 IN./MIN.

BRIDGEPORT SERIES 1 MILLING MACHINES
SPECS:

MOVEMENTS: X 30" Y 12"
KNEE TRAVEL 12"
QUILL TRAVEL: 5"
NEWALL DIGITAL READOUT
VARIABLE SPEED SPINDLE: 50-4200

BRIDGEPORT SERIES 2 SPECIAL MILLING MACHINE
SPECS:

MOVEMENTS: X 33.5" Y 15"
KNEE TRAVEL: 12"
QUILLTRAVEL: 5"
VARIABLE SPINDLE: 50-4200 RPM
SONY DIGITAL READOUT

KEARNEY & TRECKER HORIZONTAL MILLING MACHINE
SPECS:

MAXIMUM TRAVEL: X 28" Y12"

RADIAL DRILLS

CARLTON RADIAL ARM DRILL 3'-9" COLUMN
SPECS:

LATHES

LE BLOND REGAL LATHE
SPECS:

72" BED 8" SWING

LEBLOND LATHE
SPECS:

48" BED 8" SWING

AMERICAN PACEMAKER LATHE
SPECS:

96" BED 13" SWING

HARDINGE TURRET LATHE
SPECS:

6 TOOL TURRET

Inspection

BROWN AND SHARP GAUGE 2000 CMM

MEASURING RANGE: 18" x 20" x 16"
PART SIZE CAPACITY: 22" x 29.5" x 19"

QUADRA-CHEK 2000 COMPARITOR

ROCKWELL HARDNESS TESTER

TESA HITE ELECTRONIC HEIGHT GAGE

6' x 3' GRANITE SURFACE PLATE

Comments: Coulsons
Updated: August 3, 1999